Archives for : January 2017

If You Have a Gas Bottle You Need One of These

If You Own A Gas Bottle You Will Need A Gas Cylinder Regulator

If you happen to be using a gas cylinder for the very first time, knowing how you will have to connect to a gas regulator may be confusing and risky. But there is no need to worry as there is a gas safety device that could make your family completely safe. I recommend you to use the safest devices from GASFUSE. You could learn more about their products at gasfuse.com. Also in this article, we have listed a useful guide that can assist you in connecting a variety of gas bottles.

How To Connect The Gas Regulator On Propane Gas Bottles

These types of cylinders feature a 27mm valve that can only be used with a 27mm regulator. Below are the instructions on how to use the regulator:

•Take off the plastic protective plug from the valve (female) outlet on your cylinder connection. Leave it hanging with the purpose of replacing it at a later stage.

•Check on your bullnose connection for damages.

•Now using the right sized spanner take the bullnose connection and screw it into the female cylinder valve connection. This is the stage that is of importance that you ensure that the connection on the gas bottle is very tight.

•When you want to use the gas, turn the hand wheel valve on your cylinder using an anti-clockwise direction.

How To Disconnect Your Propane Gas Bottle

•Make sure you turn the hand wheel valve off using a clockwise rotation.

•Excepting the multi-bottle installations that feature a changeover valve, make sure you turn the gas tap off when it has been fitted to any appliance. You will need to make sure the pilot lights and burner have completely gone out. If you have an installation that features a changeover valve you will only have to turn the gas bottle that is empty off.

•You should never remove the connecting nut or regulator when the bottle valve is open.

•Use a spanner in order to remove your regulator.

•You should now replace your protective plug into your valve outlet.

gasfuse gas safety

 

How To Connect Patio Gas Bottles

The Green patio gas bottles use 27mm valves which mean that they can only be utilized with a 27mm gas regulator that clip-on. There is no protective caps present so it becomes important to make sure that the valve at the top is kept clean and is free from dirt or debris. Your regulator should begin in the 3 o’ clock “off” position.

If your gas regulator “off” or “on” switch becomes stuck when you turn the gas-supply on, your regulator has not been connected in the correct way.

•Push your gas regulator downwards on the gas bottle valve followed by firmly pushing downwards until such stage that you hear a click that will indicate that your regulator is in place.

•When turning the gas on turning the valve in an anti-clockwise direction till it reaches the 12 o’ clock position.

•Make sure you always turn the valve to the position marked “off” after use.

Disconnecting Your Patio Gas Bottle

•Turn your regulator switch in a clockwise direction until it reaches the “off” position.

•Press on the “push” button and carefully lift off the regulator.



%d bloggers like this: